IPSec VPN Virtual Private Network enables you to securely obtain remote resources by establishing an encrypted tunnel across the Internet. Step 1 Open the ShrewSoft VPN Access Manager and click Add to add a Profile.
We will now configure the Shrew Soft VPN client.
Configure shrew soft vpn for cisco. Configure the ShrewSoft VPN client We will now configure the Shrew Soft VPN client. The Shrew Soft VPN Client has been tested with Cisco products to ensure interoperability. Click the General tab.
This completes the configuration on the RV340 Series Router. Configure the ShrewSoft VPN client. The Shrew Soft VPN Access Manager window opens.
It contains no trial period limits nag screens or unrelated software bundles. In the VPN Site Configuration window that appears configure the. Scroll down to the Local Users table and press the plus icon to add a new user.
The Standard version provides a robust feature set that allows the user to connect to a wide range of open source and commercial gateways. The General section is used to configure the. Open Shrew VPN Access Manager and click Add to add a profile.
The Add user accounts page opens. Select the method used to automatically configure client settings. Two Configuration Methods are available.
Enter a username for the user. The Shrew Soft VPN Client for Windows is available in two different editions Standard and Professional. The Remote Host section must be configured.
Learn how to create Client-to Si. The RV130 and RV130W work as IPSec VPN servers and support the Shrew Soft VPN client. When a remote gateway is configured to support the Configuration Exchange it provides a list of networks that are accessible via VPN Client Gateway.
Open the Access Manager application and create a new site configuration. The Auto Configuration mode should be set to ike config pull. The default value for this setting is Pull as it is the only method supported by the IPsec Tools racoon daemon.
Configure the Shrew VPN Client Connection on Windows. This network topology information along with the client address are used to describe the security policies for this site configuration. Navigate to System Configuration User Accounts.
Click the Shrew VPN Client program on the computer and open it. The Host Name or IP Address is defined as 101120 to match the ASA outside public interface address. In the Remote Host section under the General tab enter the public Host Name or IP Address of the network you are trying to connect to.
Open the ShrewSoft VPN Access Manager and click Add to add a Profile. The VPN Site Configuration window appears. Enter a password in the New Password field.
The client uses the pull configuration method to acquire the following parameters automatically from the gateway. The configuration example described below will allow an IPsec VPN client to communicate with a single remote private network. The VPN Site Configuration window appears.
Make sure to download the latest release of the client software. For the VPN to work the tunnel uses UDP port 500 which should be set to allow ISAKMP traffic to be forwarded at the firewall. Ensure that the Port number is set to the default value of 500.
Shrew Soft is a VPN service provider that is compatible with RV160 and RV260 routers and allows users to protect their data. The method chosen should match the method supported by your VPN Gateway. Configure the settings listed below in the following tabs.
In the VPN Site Configuration window that appears configure the General tab.