Protect from moisture sand dust grime pocket lint and more without a bulky case. Another option is to use a tooth pick to gently scrape the inside of the port.
I managed to clear the majority of it out with an unfolded paperclip however the there is still an area behind the pinstrip which has a lump of lint as per pic below.
How to get lint out of usb c port. On investigation i realised the female microusb port on the phone had managed to get some pocket lint inside which had subsequently been compressed by insertion of the cable. Direct the small tube at the micro mini usb port on your smartphone tablet. Next start with short bursts of compressed air into the port.
I cant for love nor money figure out how to find the damn thing. Take your time and be as gentle as possible you don t want to damage the port or anything else. Insert the needle gently into the left or right side of the charger port.
Continue pulling the needle upward gently until all of the lint is cleared from the port. Do them at an angle so the lint has room to move around and fall out. Sweep the toothpick around the inside of the port to loosen up any dust then give the phone a shake to make it fall out.
Finding a usb port number right windows 10 using software to program an external piece of hardware it uses usb to connect it but asks for the port number. Take care not to scratch the anchors on the left and right of the port with the tip of the needle. Condensation of course is water and you don t want that anywhere near your usb c or microusb ports.
Any device with a usb c port or standard 3 5mm earphone jack will work perfectly. Remove and reapply tape when required or you may be able to purchase usb c dust plugs as seen in the link below. Compatibility for usb type c this dust plug set fits perfectly with usb c android smartphones laptops such as macbook 12 inch google chromebook pixel.
You might have to blow into the port in between scrapings to get some of the loose lint and dirt out of the way. This gives any dust in the usb port a place to escape. When you think you ve cleaned the port out connect your iphone to the charging cable again and see if it worked.
Drag the tip of the needle upward to pull the lint out of the port. Don t tip the can this can cause liquid to come out of the tube. These should be 1 2 second bursts.
Frobert robert use canned compressed air to blow the dust from port if need be carefully pick lint out with tooth pick and then cover port with a small piece of tape to keep clean. Do not put the tube in the port.